Innovation creates a competitive edge

Performance Tuning for the Claas Arion 420 4.5 FPT Tier 4

PowerControl PDI10 was specifically developed for agricultural applications with the aim of reaching the full potential of the engine and reducing fuel consumption. With this tuning system, the PDI10, both advantages are combined: maximum power output and low operating costs.

Claas Arion 420 4.5 FPT Tier 4Claas Arion 420 4.5 FPT Tier 4


Configure your Claas Arion 420 chip tuning now:

Wählen Sie Ihr Fahrzeug
Hersteller
  • -----------------------------
Modell
  • -----------------------------
Motor
  • -----------------------------


Turning the Claas Arion 420 into a real power tractor

The mobile dynamometer from DTE makes it all happen! Directly connected to the PTO, the DTE mechatronics technicians measure the serial performance of Claas Arion 420. And here comes the PDI10... After being installed, the programming is carried out in coordination with the customer. Depending on the tractor and engine, a professional chiptuning with DTE’s power increase can raise power up to 25 percent. This means that your Claas Arion 420 works at peak performance even under extreme load conditions.

Exact tuning of the Claas Arion 420 at the PTO shaftExact tuning of the Claas Arion 420 at the PTO shaft
PowerControl PDI from DTE SystemssPowerControl PDI from DTE Systems

Chip tuning for Claas Arion 420

  Performance +25 %
  improved torque
  More about Injector-Tuning

 
DTE at a glance
  • Technology leader since 1996
  • Developed and manufactured in Germany
  • Ready for shipment in 24 hours
  • Personal consultation
  • Safety & Warranty